Monthly Archives: July 2018

Tips For The Safe Operation Of Heavy Duty Overhead Cranes

Heavy-duty overhead cranes can be a valuable tool in the workplace. As long as they are used correctly, they provide a safe and efficient way to move objects that are too heavy to lift by hand or that are too bulky to move through other means.

Like other types of equipment, however, these cranes can be dangerous when proper safety procedures are not followed. To prevent any accidents or injuries in the workplace, it is important that all crane operators are trained on how to use these cranes correctly. Below are some safe operation tips for heavy-duty overhead cranes.

reliable heavy duty crane for sale

Heavy Duty Overhead Crane

1. Always verify that the area is clear before using the crane.

Some of the most common crane-related injuries involve loads falling on people who are standing or walking underneath them. These accidents can easily be prevented by making sure that there is no one in the immediate vicinity of the crane while it is in operation.

Not only does the crane operator need to carefully check the area for people but there should also be warning lights or sounds that alert people in the area that the crane is in use. That way, they won’t inadvertently walk into the area where it is used.

2. Make sure the crane is properly maintained.

Never operate a crane that is in disrepair or that has not been cared for properly. Accidents are far more likely to occur when the equipment is in bad shape. Regularly inspect it, looking for signs of wear or damage. Replace any parts on an as-needed basis. Make sure to follow the manufacturer’s recommendations in terms of ongoing maintenance. The better job you do of maintaining your crane, the less likely problems are to occur.

3. Always make sure that loads are secure before turning the crane on.

Crane operators need to be trained in how to properly secure loads. Loads that aren’t attached securely to the crane can fall, causing damage, injuries, or death. It is absolutely essential that all loads are checked and rechecked before being lifted up in the air. http://overheadcranesmanufacturer.com/

4. Make sure employees are properly trained.

Anyone who operates the crane should be specially trained as a crane operator. Don’t allow general employees to use the crane without proper training.

heavy duty overhead crane for sale

Professional Overhead crane for sale

5. Use a safety checklist to make sure that everyone is on the same page.

Create a checklist for your employees that needs to be followed every time the crane is used. This checklist should include all of the steps that need to be taken to ensure that the crane is safe to use. http://overheadcranesmanufacturer.com/heavy-duty-overhead-crane/

This includes everything from performing the initial check to make sure the area is clear and that the equipment is in good shape to making sure that the load is secure and verifying that the crane is not overloaded. Make sure that employees go through this checklist each and every time that they use the crane.

These tips for safe operation are essential if you have a heavy duty overhead crane at your place of business. Make sure that all of your employees are familiar with them.

What Are Different Types Of Single Girder Gantry Cranes?

One of the most cost effective gantry cranes that you can install at your facility is a single girder gantry crane. There are many advantages to using this particular style, especially if you are in a warehouse setting. Larger gantry cranes which are designed for moving large containers from ships, or working on construction sites for skyscrapers and bridges, are much too large to fit in this type of facility. They can have a maximum load capability of about 20 tons, and can have a span of well over 100 feet.

What Are the Advantages To Using One?

The main advantages to using one of these is that there is a low deadweight, offering much more headroom. It will use a model rail hoist designed for low headroom use, and is a very economical solution for those that use this with a span of less than 90 feet. Due to the fact there is only one girder, it has a much lower production cost than other gantry cranes that are substantially larger. It is also much less costly than when using a double girder model which uses two girders instead of one. Manufacturing time is faster, along with the speed at which it can be installed, primarily because it is using the existing structure in most cases for support. These can be used with many different types of businesses that are responsible for transporting and moving smaller items opposed to larger ones at construction sites. More at https://ellsengantrycrane.com/single-girder-gantry-crane/.

How Far Can They Take The Material?

The distance that it will take material can be up to 200 feet away they are almost always used in a workstation area. Their capacity usually starts at about thousand pounds, and goes up to 5 tons, but they can be designed for much more than that. Additionally, the monobox construction makes it possible for 10 ton single girder trains to successfully move most heavy items, having a span of about 60 to 80 feet.

Different Types Of Single Girder Gantry Cranes

The main differences and single girder gantry cranes is in the way that they move. There are traveling gantry cranes which means that the merchandise will move across the bridge or runway itself. If it is a traversing gantry crane, there is a mechanical gear or trolley that can be used to go from one end to the other. Both of these will use some type of hoist that will allow the merchandise to be lifted up, and brought back down, to specific areas within the facility.

The installation of one of these gantry cranes inside of your worksite, or wherever it happens to be installed, can improve your production levels. It will cost far less than any other gantry crane, yet will provide you with the capability to move items or pallets up to 10 tons in weight safely and securely. You can have these installed in under a week in some cases, and once you do, you will notice that it will be much easier for your workers to keep up with production and also improve overall safety at your facility. More at https://ellsengantrycrane.com/.